Description:
SCOPE OF LEARNING:
1.Measurement and Analysis of Different parameters of Solar PV Module
- a. Open circuit voltage (Voc) and short circuit current (Isc) of Solar PV module
- b. Parameters measurement with parallel Solar PV modules
- c. Parameters measurement with series Solar PV modules
- d. I-V characteristics of PV Module and PV Array
- e. Power curve of PV Module and PV Array
- f. Efficiency
- g. Fill Factor
- 2. Understanding & estimating Solar PV system
- 3. Load Estimation and calculation
- 4. Understanding units kVA and kWatt for Inverter and Solar PV Modules
- 5. Study of charge controller
- 6. Study of different parameters of Inverter
- a. Efficiency measurement
- b. PWM switching technique
- c. Charging of batteries
- d. Protection like over load and low battery
- 7. Analysis and calculate the system efficiency and losses at different stages
- 8. Analysis of electricity generation from Solar PV system
- 9. Analysis of battery backup at different load
- 10. Study the Batteries and their specification Testing of battery using gravity hydrometer
- 11. Analysis the effect of dust on Solar PV module
- 12. Analysis of effect of temperature on Solar PV Module
- 13. Study of different parameters of Inverter
- a. Efficiency measurement
- b. PWM switching technique
- c. Charging of batteries
- d. Protection like over load and low battery
- 14.Study about safety and precaution for installation of Solar system
- TECHNICAL SPECIFICATIONS:
Power Supplies:
- Operated on Mains power 230V, 50Hz +10%
Digital/Analog Meters:
DC Voltmeter : 0-300V
DC Ammeter : 0-40A
Multi Function Meter
- Voltage-10-230V
- Current-100mA-5A
- Watt-10-1200W
- Energy meter
- Display Resolution- 0.001kWh
- Frequency-50Hz
Components are mounted on the panels are:
- Power And Charge Controller Unit (Solar)
- DC to AC Converter (Inverter)
- Single Phase Lamp Load Switched Control.
SYSTEM INCLUDES:
- 250Wp Solar panel: 4 Nos.
- Battery 100Ah: 4 Nos.
- Charge Controller: 1 No.
- Inverter : 1kVA
- Control panel for experiments equipped with meters, connecting terminals and switches
SOLAR PANEL:
- Pm : 250Wp
- Voc : 43V
- Isc : 7.75A
- Vmp: 35V
- Imp : 7.14A
- Qty : 4Nos.
CONTROL PANEL WITH INVERTER:
- Capacity: 1000VA
- Input Voltage: 190~260V AC
- Output Voltage on Mains mode: same as input
- Output Voltage on UPS mode: 210~245V
- Output Frequency on UPS mode: 50Hz ±0.1Hz
- Output waveform on Mains mode: same as input
- Output waveform on UPS mode: Modified Sine wave
- Battery Charging Current: 12A
- Efficiency at full load : >80% UPS Overload/UPS Short circuit: Yes
- Technology: Microcontroller based
- MCB: C Type 16A-1nos
SALIENT FEATURES:
- Front panel built with high class insulated Bakelite sheet with Sticker well printed circuits and symbols.
- The trainer is housed in Modular Based Rack Type Aluminum Extruded Metal cabinet.
- Instruction manual.
- Patch Cords 4mm (Heavy Duty)
- High Voltage Test Points are Provided With 4mm Safety Sockets
- Short Circuit protection with the MCB.
- Size of the trainer set 48”x24”
BATTERY:
- Solar Battery Capacity : 12V/100Ah
- Type : C10
- Qty: 2 Nos.
CHARGE CONTROLLER:
- Solar PV Module : 24–50V
- Current : 40A
- Battery voltage : 24V
- Technology : PWM based MPPT
- Charging Stage : Bulk, Absorptions and Float
Optional Requirement:
- Rheostat : 50Ohm 15A 1Nos
SCOPE OF SUPPLY:
- Solar Power Generation Trainer
- Battery Bank
- Solar Cell Panels
- Stand For Holding the Solar Panels
- Inverter (Inbulit)